3/8" Regular U Channel
Regular U-Channel has a low 3/8" profile allowing for maximum glass exposure. It is most commonly used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8" thick glass are available, and are individually wrapped to protect the finish. Wet Glazed with Clear Silicone to Secure Glass Available in Popular 98" Lengths. End Caps Offered to Conceal Ends of Channel Available in Chrome, Brushed Nickel and Brite Gold Finishes
3/8" Deep U Channel
Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 3/8" thick glass are available, and are individually wrapped to protect the finish. This 3/4" high profile Deep U-Channel can be used as the top channel in installations where the glass must be inserted into the top channel, then lowered into the Regular U-Channel. Wet Glazed with Clear Silicone to Secure Glass All Available in Popular 98" Lengths. Some Available in Economical 144" Stock Lengths End Caps Offered to Conceal Ends of Channel Available in Up to Seventeen Finishes For prices on other colours please submit request
1/2" Regular U Channel
Regular U-Channel has a low 3/8" profile allowing for maximum glass exposure. It is most commonly used for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 1/2" thick glass are available, and are individually wrapped to protect the finish. Wet Glazed with Clear Silicone to Secure Glass Available in Popular 98" Lengths. End Caps Offered to Conceal Ends of Channel Available in Chrome, Brushed Nickel and Brite Gold Finishes
1/2" Deep U Channel
Deep U-Channel is for securing fixed panels of glass to the wall, ceiling or floor. Widths suitable for 1/2" thick glass are available, and are individually wrapped to protect the finish. This 3/4" high profile Deep U-Channel can be used as the top channel in installations where the glass must be inserted into the top channel, then lowered into the Regular U-Channel. Wet Glazed with Clear Silicone to Secure Glass All Available in Popular 98" Lengths. Some Available in Economical 144" Stock Lengths End Caps Offered to Conceal Ends of Channel Available in Up to Seventeen Finishes Pricing for other colors available upon request
Shower Door Header Kit
The Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66", 98" or 144" lengths, each. Header Extrusion has a narrow 1-1/4" face to minimize the visible sight line. 90 Degree, 135 Degree or Adjustable Corners are sold separately. Also available is a special Adapter Block for use on pivot hinge installations. Brass Wall Brackets are included in each kit. A Blank Mounting Bracket is offered separately for installations where the Header does not meet the wall at 90 Degrees, and the standard Wall Mounting Brackets cannot be used. Header is constructed of 6063-T5 Aluminum Alloy. For 5/16", 3/8", and 1/2" (8, 10, and 12 mm) Glass Available in Up to Seventeen Finishes Choice of Profiles: Round on One Side and Flat on the Other, or Flat on Both Sides of Header For colors not listed prices available upon request
Flat or Square Header Rail Kit
The Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Sold in 98" lengths only Header Extrusion has a narrow 1-1/4" face to minimize the visible sight line. 90 Degree, 135 Degree or Adjustable Corners are sold separately. Also available is a special Adapter Block for use on pivot hinge installations. Brass Wall Brackets are included in each kit. A Blank Mounting Bracket is offered separately for installations where the Header does not meet the wall at 90 Degrees, and the standard Wall Mounting Brackets cannot be used. Header is constructed of 6063-T5 Aluminum Alloy. For 5/16", 3/8", and 1/2" (8, 10, and 12 mm) Glass
EZ-Adjust Shower Door Header Kit
The NEW EZ-Adjust Shower Door Header Kit provides a safe and beautiful frameless shower installation by securing enclosures that do not reach the ceiling. Acting as a "crown" over the top of the glass, the EZ-Adjust Shower Door Header Kit is bracketed to each wall. The EZ-Adjust System allows adjustability after installation in that the hinge (PPH06 and SRPPH06 only) can be moved left and right as desired. No Hole Drilling Required Through Header for Adaptor, if Using Prima Hinge Model PPH06 or Senior Prima Hinge Model SRPPH06 Constructed of Heavy 6063-T5 Aluminum Alloy For Use with 5/16" (8 mm), 3/8" (10 mm), and 1/2" (12 mm) Thick Glass The EZ-Adjust Header Kit is stocked in up to eight popular finishes. A choice of 98" and 144" stock lengths allow the user to cut as desired. A Snap-in Filler Insert for the door pocket, along with Wall Mounting Brackets and Clear Glazing Vinyl round out the Kit.
